Forsus
The Forsus appliance is used in order to help move the upper molars back while moving the lower arch forward. Composed of a spring coil rod, the appliance is used while a patient is currently wearing braces. It runs from the upper first molar band down to the lower archwire. You may notice some discomfort initially, so we recommend a soft food diet for the first few days after the appliance is placed.
Regular anti-inflammatory medication may help with any pain, if needed. It is important to keep the appliance clean; you may do this by carefully brushing the coil and other metal pieces of the appliance. Also, we recommend that patients not open their mouths very wide, as the appliance may come apart.
If your Forsus appliance breaks, please contact our office immediately to schedule a repair appointment.
Herbst
One of the most common problems orthodontists treat is the discrepancy that occurs when the upper teeth protrude beyond the lower. Ordinarily, when we see a patient with the upper teeth protruding, we tend to think that the upper jaw and teeth are too far forward; but, more often than not, this condition is due to a small lower jaw that is further back than it should be. With these patients, we would like to encourage the lower jaw to catch up in growth, and braces like the Herbst appliance help this happen.
Even though the Herbst appliance prevents the lower jaw from moving backward, opening and closing movement still occur easily, and patients do not have any problems learning to chew their food with their lower jaw in this new position.
As with all kinds of braces, patients with Herbst appliances need to be careful about what they eat. For instance, cold foods such as ice slushes, Popsicles and ice will freeze the cement and make the brace loosen. Sticky foods such as caramels, bubble gum and candy suckers will pull the brace away from the teeth. Hard foods like crisp vegetables and hard candies will bend and loosen the Herbst appliance, too. So stay away from these foods during your orthodontic treatment.
Your Herbst appliance will be checked and adjusted at your appointments. If, sometimes between appointments, you develop some sore areas on the inside of your cheeks, please do not try to adjust the appliance.
Headgear
Headgear is often used to correct an excessive overbite. This is done by placing pressure against the upper teeth and jaw, which would hold the teeth in position or help move them into better positions. The severity of the problem determines the length of time headgear needs to be worn. The key to success with your headgear appliance is consistency. Headgear must be worn a certain number of hours per day, and if not, it must be made up the following day. Headgear should never be worn while playing sports and should also be removed while eating or brushing your teeth.
Reverse Pull Headgear
In some cases where an underbite is present, we may recommend using reverse headgear (face mask) as part of the treatment plan. This appliance is designed to fix the discrepancy between your upper and lower jaws by moving the upper jaw forward to correct the malocclusion.
For the results to be successful, patient compliance is of the utmost importance. It may take several days to become accustomed to the appliance. With practice, it will become easier to place and remove the reverse headgear. We will determine the length of time you should wear your headgear, but it is generally 10-14 hours per day, which can include wearing while you sleep. You should not wear your headgear while participating in sporting activities.
Sometimes your chin may get irritated from the headgear. If this happens, you should always keep the area clean and often change the insert in the chin cup. If the skin becomes very dry, the use of moisturizing cream twice a day can be helpful. If your jaw joints are extremely sore or you cannot open and close your mouth without difficulty, stop wearing the appliance and contact us for further instructions as we may need to fit you with a different appliance. Also, if your headgear breaks or is bent, call us so we can fit you in with a repair appointment so your treatment will not be delayed.
Rapid Palatal Expander
Attached to the upper molars through bonding or by cemented bands, the Rapid Palatal Expander is an orthodontic device used to create a wider space in the upper jaw. It is typically used when the upper jaw is too narrow for the lower jaw or when the upper teeth are crowded or blocked out of the dental arch.
When patients are still growing, their connective tissue between the left and right halves of their upper jaw is very responsive to expansion. By simply activating the expander by turning a screw in the center, with a special key we provide, gradual outward pressure is placed on the left and right halves of the upper jaw. This pressure causes an increased amount of bone to grow between the right and left halves of the jaw, ultimately resulting in an increased width.
Quad Helix
The Quad Helix is a fixed orthodontic appliance used for upper arch expansion. Bands are cemented to your back molars to keep the appliance in place while four helix springs help widen the arch. This appliance is ideal for patients with crowding in the upper arch or to correct a posterior crossbite.
It is important to maintain a good oral hygiene regimen while wearing the Quad Helix. Patients should brush around and under the appliance and also floss and rinse thoroughly to remove any food particles.
Carriere Motion
The Carriere Motion is an orthodontic appliance used to address misaligned back teeth before braces are put on. It attaches to the canine tooth and the permanent first molar on each side of the mouth and is connected by an elastic band. The appliance is individually sized to fit your mouth and directs backward movement with controlled rotation of the molars so that the entire canine to molar segment moves together. Treatment time takes an average of six months to complete and can be a great help to preparing the mouth for braces.